Results 1 to 3 of 3

Threaded View

  1. #1
    Join Date
    Apr 2012

    Default 351 Nascar windsor engine

    Hi I am selling a 351 Windsor ex Nascar dry sump engine. Last dynode at 680hp.
    It is a Genuine 4 bolt SVO Ford block bored 35 thou
    It has Chapman ported SVO heads with brand new titanium Valves and roller rockers.
    Edelbrock Victor 351Y Manifold port matched.
    A 780cfm Holley carby that flows well over 1000cfm
    Knife edged steel crank standard stroke.
    A roller camshaft with spec sheet.
    A complete set of Oliver conrods and a set of seven Carrillo conrods both measure 6.202 inches.
    A full set of JE pistons, Morosso Distibutor and Ford motorsport alloy rocker covers.
    Dry sump (needs repair) 4 stage oil pump along with numerous other bits and pieces to go with this engine.
    It is a complete engine requiring a good clean up of parts and a full gasket and ring set.
    Nascar had rules governing engine size and they were not permitted to exceed 358ci either by bore size or stroke. this is a thick walled block and can safely go out a lot further. this Engine cost $16000 to buy in pieces and today I am asking only $8000. Dandy Engines said I should be offering it for over $10k but I just want to move it on. A huge loss on my behalf.
    Be realistic and show me where you can build a genuine 680HP engine for under $10K
    Please leave email address if you want more photos.
    cheers Adam

    Attached Images Attached Images
    Last edited by Adamxb; 03-03-13 at 08:42 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts