2 speed powerglide

[shaun sr]

ok so i have a 2speed powerglide behind a 2jz, i removed it to change the front seal and put it pack in and its all good, but now its leaking big time from the pan drivers side only between the gearbox and the gasket, have tried 2 different types of gaskets and 2 differnt types of gasket goo, and also have tried just putting it on dry but still leakin, also noticed its leaking from the triangle thing above the pan but have tried new plate new gasket new o-ring and thats still leaking aswell. i have checked the dip stick and the lines for the oil cooler and its not that,

any help would be great because i have been trying to fix this stupid problem for weeks now . thanks

[Centura2JZ]

Few of the bottom bolts that hold the bell housing on acctually go through into the gearbox. you need to seal these bolts otherwise it will leak.

Hope that helps
Milan

[shaun sr]

i tighted them bolt befor i but it back in or is ther some sorta gasket for it

[Centura2JZ]

cover the thread that goes inside the gearbox than put the bolt in than tighten it.