xf blow through

[yazholes]

hay guys just needing some help.

i got a worked 250 crossflow 4.1 EFI running on in my xf and was woundering if anyone hear knows anything about how to use a blowthrough turbo on this engine.

what carby to use?

how i should run the piping.

do i have to run a intercooler if im running less than 10 psi boost.

would it be easer to run it on gas if so how does that work would it infect the gas where the injectors use to be or do the injector holes get pluge and then run a carby.

any info would be grate or if you know of any one that knows info let me know. thanks

[ozsilencer82]

just a question, why carby when you can do enough work with the injected motor?? just curious

[turbo240sx]

first off r u going to be using an intercooler. if so then u can run ur piping from the inlet of the turbo to the intercooler then were the air comes out of the compressor housing run that pipe to the browthrough that bolts to the carb that should work.thats wat i have been seeing alot of guys doing.

http://images.google.com/imgres?imgurl=http://www.lateral-g.net/temp/greg3.jpg&imgrefurl=http://www.lateral-g.net/forums/showthread.php4%3Ft%3D876&usg=__FL4KiyjUwASoZ5MsQKVd7DE9Rpo=&h=600&w=800&sz=124&hl=en&start=4&um=1&tbnid=23MQXYUX9d265M:&tbnh=107&tbnw=143&prev=/images%3Fq%3Dblow%2Bthrough%26hl%3Den%26rlz%3D1R2A CEW_enUS338%26um%3D1

[turbo240sx]

well u can do the samething with the fuel injection also.