boostdead33
03-04-08, 01:20 PM
Hey Guys thought id throw up a phew pics of my car its been on here a couple of times yet I never seem to be able to stop moding it lol.
Engine: RB26DET conversion out of a r32 gtr, bought the engine from perth as a good runner got it over here pulled here down to have a look inside and found 6 scored bores 1 stuffed piston and a main and big end bearing f*cked although block turned out to be a N1 item with 24U stamped on it. Polished and details engine bay
Exhaust: 3.5" off the tubo hi flow cat and 3.5" catback
Suspension: tein
Wheels: new 18" drift r's
Exterior[b] m-sport kit and drift lip genuine gtr ser3 front bar and lip and genuine gtr grill optional gt wing
[b]Modifications:
Currently in the process of rebuilding the engine with ross racing forged pistons, prepped and shot peens rods, ARP rod bolts, bottom end stud kit prepped crank, detail engine block, fully ported head, stage 2 tighe cams with 272in and 264 ex, cam gears, n1 oil pump and water pump, 700cc sard injectors, sard fpr, modified fuel rail, custom exhaust manifold, garrett gt3082r turbo with both .82 and 106 housings, tial 44mm wastgate, nispro ecu, bosche 044 and 3/8" aluminium lines and 2l custom surg tank, jjr alloy radiator, trust intercooler, nismo clutch and lightened fly wheel.
Stereo Audio / Visual: kenwood double din and splits fron and rear
Estimated Power: going for 400rwhp on 18psi with the 1.06 and 450-500 on 24+psi
The engine should be finished soon and hopfully back on the road by the end of march, then a completely new post with the finished results. Just remeber my car doesnt get touch by a shop at all everything is done at home saves heaps of money and doing all this on a 3rd year apprentice wage too. I would really love to get a photo shoot when im finished :D
Engine: RB26DET conversion out of a r32 gtr, bought the engine from perth as a good runner got it over here pulled here down to have a look inside and found 6 scored bores 1 stuffed piston and a main and big end bearing f*cked although block turned out to be a N1 item with 24U stamped on it. Polished and details engine bay
Exhaust: 3.5" off the tubo hi flow cat and 3.5" catback
Suspension: tein
Wheels: new 18" drift r's
Exterior[b] m-sport kit and drift lip genuine gtr ser3 front bar and lip and genuine gtr grill optional gt wing
[b]Modifications:
Currently in the process of rebuilding the engine with ross racing forged pistons, prepped and shot peens rods, ARP rod bolts, bottom end stud kit prepped crank, detail engine block, fully ported head, stage 2 tighe cams with 272in and 264 ex, cam gears, n1 oil pump and water pump, 700cc sard injectors, sard fpr, modified fuel rail, custom exhaust manifold, garrett gt3082r turbo with both .82 and 106 housings, tial 44mm wastgate, nispro ecu, bosche 044 and 3/8" aluminium lines and 2l custom surg tank, jjr alloy radiator, trust intercooler, nismo clutch and lightened fly wheel.
Stereo Audio / Visual: kenwood double din and splits fron and rear
Estimated Power: going for 400rwhp on 18psi with the 1.06 and 450-500 on 24+psi
The engine should be finished soon and hopfully back on the road by the end of march, then a completely new post with the finished results. Just remeber my car doesnt get touch by a shop at all everything is done at home saves heaps of money and doing all this on a 3rd year apprentice wage too. I would really love to get a photo shoot when im finished :D