Post up your Dyno Sheets

[Martin.]

So we have had the "post your ride pics" ect now its time for the power runs.
Post up a pic of your sheet and Mods done so far.
I am along way from "king of the hill" but I will start it off.
02 VU SS ute LS1 A4.
Run was in 3rd with 18's on and stock diff gears (3:46)
Mods so far are.
CHE cold air set up,SS indutions T/B,comp 918 springs,custom baby comp cam,Edit by Dale(10sec_RX7) at CHE and full custom exhaust also by Dave at CHE
http://i19.photobucket.com/albums/b192/Martin_U/385dyno.jpg
And yeah the Gold star and other sticker is me poke'in fun at dale LOL

[bassaholic55]

1jz-gte, auto, ta45s, microtech, 17psi, pump fuel

http://pic2.picturetrail.com/VOL1006/3462116/10804603/180261801.jpg

[RX3ROTOR]

http://img174.imageshack.us/img174/7180/dsc00380gh1.jpg (http://imageshack.us)
mods are 20b in rx3 with turbonetics thumper 91 turbo, on 23psi on c16 for now..has gone 796hp @23psi but cant feed sheet...its running out of ignition so some cdi,s need fitting to use 28-35 psi of turbos effiiciency range , so who knows how much soon...dyno run was in 5th gear at 7500rpm with 18,s x 265 tyres ..cheers

[Big_Burnouts]

So we have had the "post your ride pics" ect now its time for the power runs.
Post up a pic of your sheet and Mods done so far.
I am along way from "king of the hill" but I will start it off.
02 VU SS ute LS1 A4.
Run was in 3rd with 18's on and stock diff gears (3:46)
Mods so far are.
CHE cold air set up,SS indutions T/B,comp 918 springs,custom baby comp cam,Edit by Dale(10sec_RX7) at CHE and full custom exhaust also by Dave at CHE
http://i19.photobucket.com/albums/b192/Martin_U/385dyno.jpg
And yeah the Gold star and other sticker is me poke'in fun at dale LOL
Nice sticker lol

[GTBMad]

Sorry couldnt help myself

PUMP FUEL 21psi

http://i23.photobucket.com/albums/b376/GTBMad/Pic9.gif

[GAS440]

can we see some pics of this vx please?

[GAS440]

nevermind i know the car
GTBmad have you see lyles vt/x twin turbo one from the sunshine coast?
built by rob at HPF aswell

[GTBMad]

nevermind i know the car
GTBmad have you see lyles vt/x twin turbo one from the sunshine coast?
built by rob at HPF aswell

Know Lyles car pretty well seen it pull over 900 rw on good fuel from what I hear his having a ball with it.

I pushed it more times than I care to remember

[MS-75]

1FZ-FE, 4.5L DOHC 24valve I6, 80 series Landcruiser engine

Stock pistons,rods, crank
stock ports, valves, cams

heavy duty valve springs
minor chamber mod to drop compression,
Supra head studs
0-rings in head,
custom plenum,
Crane Hi-6 CDI
Home made exhaust manifold
Garrett GT 4202 turbo
Garrett intercooler (cut down prime mover one)

50/50 Martini 110/Caltex vortex

Supra a340 4spd auto trans (modified/manualised),
modified lock-up torque converter

Currently fitting 125hp wet shot Nitrous kit.

1972 Crown Coupe

http://img101.imageshack.us/img101/8986/ape2goodpe2.jpg

http://img82.imageshack.us/img82/1341/ape1goodja5.jpg


Note the free Dyno hp when the lock-up clutch in the converter is activated, also see how different the two curves are.(runs were back to back)
Although the bolt-on stuff is working well, the motor is still internally pretty stock due to the expensive nature of modifications. Sand racing Arabs have extracted in excess of 1300hp from these motors relaibly for desert racing, but at the moment I'm happy with the HP/$ value I get out of it now.

If I can get enough rubber it it should push the car well under 9.5 before I need to start on the guts of the motor. (that is if we EVER get a dragstrip back in SA! Waaaaaa.)

Sean

[GAS440]

awesome car real sleeper....
genuine street driven everyday


ive been hastleing a mate to get some footage it spun 940 at a dyno comp a month ago

[Bjorn325]

Who could resist? =)

Peak. 915 Hp @ 8100rpm (42PSI boost)
Nissan SR20DE engine rebuilt for turbo. GT42R turbo, turbosmart ProGate45, rods, pistons, cams, valvesprings, great work done to the head, custom exhaust and intake manifold, rebuilt cooling system, and so on... =)