210rwkw BA 6cyl

[Fast Futura]

Hi, I thought that some one might be interested in what I have done to my car. I have a 6cyl 2004 BA Futura with the Ford body kit, 17" xr mags, lowered, tints darkest legal, John bowe exhaust system and throttle body, and now a Vortech V2 supercharger at 8psi :D
I've just had the car tuned today after running in the supercharger, its going hard :) 210rwkw with a safe tune and without an intercooler, there is more potential there, I just want to harden the motor first. The motor has stock internalls at the moment so I don't want to add any more power just yet, but I plan to eventually.
The work was done by KPM Motorsport in Adelaide and I am very happy with their work.
http://i103.photobucket.com/albums/m156/ausie_fred/IMG_05.jpg

http://i103.photobucket.com/albums/m156/ausie_fred/IMG_1446.jpg

If anyone has any questons about the car I am happy to answer them.
Fred

[pauld]

very nice, did you run the car down the drag strip yet?

[Fast Futura]

Thanks, not yet, I dont think that the adelaide international raceway is open. I am thinking of going for a drive interstate.
Good excuse to go for a drive :)

[The Gronk]

with no intercooler, does it run some form of water injection instead?

[Fast Futura]

No water injection, I didn't get the intercooler mainly because of the extra cost of the unit. The car is running well, probably because of the excellent custom tune but I will need an intercooler to get more out of the setup.

[yamr6]

Very nice, how much does that kind of set up cost? Cheers

[Fast Futura]

I had the kit ordered through CAPPA, the kit alone cost around $5000, then with the dyno time, new fuel pump, plugs, injectors, xr6 map sensor, custom intake pipe, oils and coolants it ends up around $10,000. An expensive upgrade but a lot of fun:) I just hope that the car holds up to the punishment.

[EBFXR6T]

The motor has stock internalls at the moment so I don't want to add any more power just yet, but I plan to eventually.


You may want to check but i am under the belief that the NA motor is internally identical to the turbo version.(that is the xr6 not the fpv6)so going for some more power safely shouldnt be a problem if that is the case.As someone has said here abouts i wouldnt recoment going past about 300kw ATW without striping it down, but there should be no need to go down the expensive path of a rebuild unless your REALY want to get sereous. HTH
By the way your ride is very tidy and the charger looks the part in there. Looking forward to seeing how you come along.

[[PSI-EFI]]

nice work, i usually hate fords but this brings me closer to em. welldone....:cool: [PSI-EFI]

[Vldrifter]

That Is a very niceand neat looking ford I reckon that is one of the best looking fords i have ever saw:D

[Vldrifter]

That Is a very niceand neat looking ford I reckon that is one of the best looking fords i have ever seen:D

[eddiegarcia]

Considering you are not running an intercooler, the internals are standard? and it is a bolt-on kit, I'm interested to know how much boost you are able to safely run?

[Gigantor]

Any updates yet? have u got the cooler on yet? have u been 2 the drags yet?

[mrgo40rd]

i was going to do the same thing super charge a na but the cost killed the idea ended up selling my fairmont and getting a 2006 xr6t but love the idea of a neat sleeper very nice

[VL_BOOSTIN]

you'd never know what its got under the hood when you pulled up next to it..
nice work

[dazzler351]

Meh intercooler ............just add a 50 shot of NOS !:eek:

[ROCKAH FORD]

lookin good m8 im new 2 this fullboost site, supercharged must be alot quiker aye.. But it looks gr8 m8

[plasticglock]

Looks great! Wish we had that car instead of the Taurus here in the states! Must be a rush!

[dazzler351]

I didn,t mention it but YES a tough looking sleeper ;)

[Woggsternismo]

:eek: WOW!!! this thing has to be one of the biggest sleepers ever!!! i love wat you've done with it :)